Replace a Secure Remote Access Appliance in a Failover Scenario

If your Secure Remote Access Appliance should experience failure, BeyondTrust Technical Support is prepared to help you return to full functionality as quickly as possible. If you have already set up a failover appliance, you can continue working with minimal downtime. BeyondTrust Technical Support will work with you to determine if the offline appliance needs to be replaced. This quick guide gives you the steps to replace a Secure Remote Access Appliance when you have it set up in a failover scenario.

This document is not comprehensive in its details. Rather, it is a tool to help you assemble the information you need to replace a Secure Remote Access Appliance. You may need to refer to other BeyondTrust documents during this process. For your convenience, these documents are linked to below:

Install the New Appliance

Reference Secure Remote Access Appliance Hardware Installation Guide for installation details and The Secure Remote Access Appliance in the Network to determine where to set up your new appliance. See Secure Remote Access Appliance Web Interface for further details regarding the /appliance interface.

  1. Install the appliance and log in.
    1. When you receive your new appliance, remove it from its packaging and connect the appliance to a switch.

      You may wish to save the packaging materials from the replacement appliance to return the defective appliance.

    2. Set an IP address of on a workstation and connect to a port on the same switch as the appliance.
    3. Browse to in a browser, and log in using the default username and password:
      • Username: admin
      • Password: password

      If fails, try browsing to or

  2. Set up the IP configuration.
    1. Browse to Networking > IP Configuration.
    2. Enter the appropriate IP configuration settings for the network.
    3. Save the changes and test connectivity over the new IP address.
  3. Import SSL certificates.
    1. Log into the /appliance web interface of the primary appliance, the appliance which is currently hosting all of your BeyondTrust support processes.
    2. Browse to Security > Certificates and export the certificate chain that is assigned to the active IP address.
    3. Log into the /appliance web interface of the new appliance.
    4. Import the certificates from the primary appliance and assign the server certificate to the active IP address.

Restore the Failover Configuration

For detailed failover instructions, reference the Failover Dynamics and Options with BeyondTrust and the Upgrade the BeyondTrust Software.

  1. Register the appliance.
    1. In the /appliance web interface of the new appliance, browse to the Status > Basics page and take a screenshot.
    2. Email the screenshot of the Status > Basics page to your BeyondTrust Technical Support representative.
    3. The BeyondTrust Technical Support team will build a new software package and email you installation instructions when it is ready.
  2. Refer to the Failover Configuration section of the Upgrade Guide and follow either the synchronous or the asynchronous upgrade steps, depending on the preferred procedure.

    If you have the original .nss software package that is installed on the primary appliance, you can simply install that software package on the backup appliance. You can then proceed to establish failover without installing the new software package mentioned above.

    1. Since the appliances will not begin in failover, simply skip the Break Failover Relationship step in the Upgrade Guide.
    2. If you choose to upgrade asynchronously, you must begin by downloading a backup from the primary appliance's /login > Management > Software Management page. Then restore these settings to the new appliance.
    3. Follow the rest of the failover procedure as outlined in the Upgrade Guide.
  3. Notify your BeyondTrust Technical Support representative that the upgrade is complete. BeyondTrust Technical Support will then provide you with the return shipping label and instructions for the failed appliance.

Return the Defective Appliance

  1. Reset and shut down the defective appliance.
    1. Log into the /appliance web interface of the defective appliance.
    2. Browse to the Status > Basics page, and click Reset Appliance to Factory Defaults.
    3. Wait for the reset to complete, and then click Shut Down This Appliance.
  2. Use the shipping label and instructions from BeyondTrust Technical Support along with the packaging materials from the replacement appliance to return the defective appliance.